INSTALLATION INSTRUCTIONS AND SAFETY INFORMATIONFOR THE VIKING H-10 GATE OPERATORCLASS I, CLASS II, CLASS III, AND CLASS IV Residential and Commercial
VIKING TECHNICAL SUPPORT 1.800.908.08848IMPORTANT SAFETY INFORMATIONMAINTENANCERemove the Power Harness from the Control Board (refer to page 18)•Cle
VIKING TECHNICAL SUPPORT 1.800.908.08849a. Use only the following type and size battery(ies): Yuasa NP7-12b. Donotdisposeofthebattery(ies)inre
VIKING TECHNICAL SUPPORT 1.800.908.088410IMPORTANT SAFETY INFORMATIONNOTE: This type on installation DOES NOT reverse the gate all the way back to its
VIKING TECHNICAL SUPPORT 1.800.908.088411NOTE: This type on installation DOES NOT reverse the gate all the way back to its limits when the edge sensor
VIKING TECHNICAL SUPPORT 1.800.908.088412Audible Alarm Reset Switch InstallationManual Reset for the Audible Alarm•UL325 standard requires an audible
VIKING TECHNICAL SUPPORT 1.800.908.088413! CAUTION: To Reduce the Risk of Fire or Injury to Persons:! WARNING: For use with gates at a maximum 2200 lb
VIKING TECHNICAL SUPPORT 1.800.908.088414GATE OPERATOR INSTALLATION Concrete Pad Option1. Follow the local building code to determine the required dep
VIKING TECHNICAL SUPPORT 1.800.908.088415Post Mounting OptionTIP: The operator is equipped for post mount applications and is ready for installation.
VIKING TECHNICAL SUPPORT 1.800.908.088416Operator Positioning! IMPORTANT: All openings of a horizontal slide gate are guarded or screened from the bot
VIKING TECHNICAL SUPPORT 1.800.908.088417GATE OPERATOR INSTALLATION! TECHNICAL TIP: Before starting the installation procedure;•Openandclosethega
THE VIKING H-10™ SLIDE GATE OPERATORThe H-10™ gate operator has the capacity to operate slide gates up to 2200 lbs. and 75 ft. in length at 100% duty
VIKING TECHNICAL SUPPORT 1.800.908.088418High Voltage Supply Option! Caution: Always turn off power breakers when working with high voltage. DO NOT co
VIKING TECHNICAL SUPPORT 1.800.908.088419ALow Voltage Supply OptionTIP: The operator is equipped with a Modular Power Box that can be relocated to pro
VIKING TECHNICAL SUPPORT 1.800.908.088420LIMITS SETUPTip: The gate can be moved electronically with the “Open”, “Stop” and “Close” buttons on the Cont
VIKING TECHNICAL SUPPORT 1.800.908.088421LIMITS SETUPTo Readjust the Open Limit:1. Clear the current limit setting by holding down the “Open Limit” bu
VIKING TECHNICAL SUPPORT 1.800.908.088422Two Wire Communication! IMPORTANT: DO NOT run the Master/Slave communication cable in the same conduit or wit
VIKING TECHNICAL SUPPORT 1.800.908.088423MASTER/SLAVE SETUPREQUIRED ADD-ON: Choose option A or BA. Viking Konnect - Wireless Master/Slave Kit PART# VA
VIKING TECHNICAL SUPPORT 1.800.908.088424Initial SettingsCONTROL BOARD SETUP“Timer”Hold Open TimerAutomatically closes the gate after the selected amo
VIKING TECHNICAL SUPPORT 1.800.908.088425Initial SettingsNOTE: Installing a shunt or jumper on the pins will activate the feature.CONTROL BOARD SETUP!
VIKING TECHNICAL SUPPORT 1.800.908.088426Obstruction Sensor (Primary Entrapment Protection)! IMPORTANT: The appropriate “ODS” setting is dependant upo
VIKING TECHNICAL SUPPORT 1.800.908.088427CONTROL BOARD SETUPViking HeaterThe operator has an integrated heater that is thermostatically controlled. Ac
H-10 Vehicular Gate Operator • Revision H10NXMN10.D • October 2013
VIKING TECHNICAL SUPPORT 1.800.908.088428(THIS PAGE LEFT BLANK INTENTIONALLY)
VIKING TECHNICAL SUPPORT 1.800.908.088429Re-Open Photo Beam (vehicular Safety)NOTE: This type of photo-beam installation will stop then RE-OPENS the g
VIKING TECHNICAL SUPPORT 1.800.908.088430Radio Receiver (Typical)! IMPORTANT: The Hold Open “Timer” setting (page 24) effects how the gate will respon
VIKING TECHNICAL SUPPORT 1.800.908.088431Anti-Tail Gate, Open Commands & Guard Station! TECHNICAL TIP: For more information regarding accessory co
VIKING TECHNICAL SUPPORT 1.800.908.088432Viking Loop RackTIP: This operator may be equipped with a pre-wired Loop Rack that plug-in type loop detector
VIKING TECHNICAL SUPPORT 1.800.908.088433Guidelines for Loop InstallationTable C - Recommended Number of TurnsPerimeter (ft.) Number of Turn
VIKING TECHNICAL SUPPORT 1.800.908.088434Magnetic Lock, Lock SolenoidNOTE: Viking Access Systems does not provide external gate lock devices. These it
VIKING TECHNICAL SUPPORT 1.800.908.088435Barrier Arm (B-12) Synchronization OptionNOTE: The Control Board provides a convenient solution for applicati
VIKING TECHNICAL SUPPORT 1.800.908.088436LED ReferencesIn addition to the LCD Display, the control board LEDs monitor the various circuits of the cont
VIKING TECHNICAL SUPPORT 1.800.908.088437TROUBLESHOOTINGLED ReferencesUse the table below to identify the corresponding “TS Ref#” and refer to page 38
VIKING TECHNICAL SUPPORT 1.800.908.08842PARTS DIAGRAM:Item Description Part No.1 Chassis VNXL3CH2 Chassis Battery Bracket VNXCHBBRK3 Gear Box VNXL3GB4
VIKING TECHNICAL SUPPORT 1.800.908.088438TROUBLESHOOTINGCall out LCD Display, Diag-nose Button and Diag-nose LEDLCD MSG MeaningPage 41 TS Ref #s VIKIN
VIKING TECHNICAL SUPPORT 1.800.908.088439TROUBLESHOOTINGLCD Display ReferencesLCD MSG MeaningPage 41 TS Ref #sMulti Meter DisplaysMOT AMP __._ AThis
VIKING TECHNICAL SUPPORT 1.800.908.088440TROUBLESHOOTINGLCD Display References LCD MSG MeaningPage 41 TS Ref #sError MessagesERR AC LOWIndicates th
VIKING TECHNICAL SUPPORT 1.800.908.088441TROUBLESHOOTINGSolutionsBegin the troubleshooting process by referring to the error messages on the LCD Displ
VIKING TECHNICAL SUPPORT 1.800.908.088442Access Control ConnectionsAppendix (A)Power ConnectionsThe control board provides a 24v DC output to power ex
VIKING TECHNICAL SUPPORT 1.800.908.088443Relays In GeneralNOTE: Viking Access Systems does not provided the external safety devices and access control
VIKING TECHNICAL SUPPORT 1.800.908.088444Common Radio Receivers - ConnectionsAppendix (B)
VIKING TECHNICAL SUPPORT 1.800.908.088445Solar ApplicationsNOTE: Viking recommends Solar Package (part # VA-SOCHP) for most general solar applications
VIKING TECHNICAL SUPPORT 1.800.908.088446VIKING EXPANSION PRODUCTSVIKING SOLAR KIT The components included in this package are intended to provide suf
Viking Access Systems is continuously working hard to identify and design products that will appeal to the industry and it’s needs. As
VIKING TECHNICAL SUPPORT 1.800.908.08843OPERATOR REFERENCES:1. OPERATOR COVER 2. COVER LOCK3. ACCESS DOOR external access to the Manual Rele
VIKING ACCESS SYSTEMS631 Wald Irvine, CA 92618Phone 800.908.0884Fax 949.753.1640www.vikingaccess.comSTANDARD FEATURESAND OPERATOR SPECIFICATIONSINSTAL
VIKING TECHNICAL SUPPORT 1.800.908.08844CONTROL BOARD REFERENCES:1. POWER HARNESS CONNECTOR provides power to the control board. pg 18-192. “OPEN LE
VIKING TECHNICAL SUPPORT 1.800.908.08845TABLE OF CONTENTS:PARTS DIAGRAM/PARTS LIST 2OPERATOR REFERENCES 3CONTROL B
VIKING TECHNICAL SUPPORT 1.800.908.08846IMPORTANT SAFETY INFORMATIONIMPORTANT SAFETY INSTRUCTIONS! WARNING! To reduce the risk of severe injury or dea
VIKING TECHNICAL SUPPORT 1.800.908.08847IMPORTANT SAFETY INFORMATIONIMPORTANT INSTALLATION INSTRUCTIONS (Continued)6. Controls intended for user activ
Comments to this Manuals