Controlled-products-systems-group 104470 User Manual download pdf (Page 8)

Page 8

January, 2004

412 Operator And

455 D Control Panel Installation Manual

Outward swinging gate:

If you are installing the 412 Operator to swing the gate

outward, construct a steel elbow of sufficient size to

attach to the gate pillar and rear mounting bracket (see

Figure 7 for elbow dimensions).

ATTACH THE OPERATOR TO THE REAR

OUNTING BRACKET

Attach the operator to the rear mounting bracket with

the long pin and one snap ring on the bottom (see

Figure 8).

ATTACH THE OPERATOR TO THE FRONT

OUNTING BRACKET

Attach the operator to the front mounting bracket with

the short pin and one snap ring on the bottom and one

snap ring on the top (see Figure 9).

11 13/16 in.

(30 cm)

4 in.

(10 cm)

5 29/32 in.

(15 cm)

Figure 6. The required dimensions of the recessed liner

when notching the gate post

Gate post

(or column)

Axis of rotation

for gate leaf

Center of gate leaf

Figure 5. Important

mounting dimensions for

inward-swinging 412

operators, top view

Mounting Dimensions

90-deg Swing 110-deg Swing

5 3/4 in. (14.5 cm) 4 7/8 in. (12.5 cm)

WARNING! A and B should differ by no more than 2 in. Larger differences may dangerously alter the speed of

operation.

36 1/4 in. (89.2 cm)

Maximum 4 1/2 in. (10.8 cm) 3 3/8 in. (8.45 cm)

E Less Than A

Less Than A

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comments to this Manuals

No comments

Controlled-products-systems-group 104470 User Manual Page 8

Comments to this Manuals

Related products and manuals for Safety Controlled-products-systems-group 104470