Controlled-products-systems-group 1812-087 User Manual download pdf (Page 27)

2.3.6 Number of Rings

This programming section sets the number of rings that the 1812 will allow to pass through the

system before it picks up the call. Some things to consider when programming this section is to not

set the number of rings low as this may cause the 1812 to answer calls that are not intended for it. If

the resident has an answer machine on their phone, this may present a problem. If the answer

machine is set to answer on the fourth ring, and the 1812 is set to answer on the 6th ring, the answer

machine will always pick-up the call be fore the 1812 does. On the other hand, if the 1812 is set to

answer on the fourth ring, and the answer machine is set to pick-up the call on the 6th ring, the 1812

will always answer the call unless the answer incoming call (section 2.3.5) is turned off. The number

of rings to answer can be set from 1 to 99 rings and must be entered as a two-digit number. For

example, if you want the 1812 to answer the call after the sixth ring, enter 0 6 in step 3.

1. Press * 1 8 and enter the four-digit MASTER CODE _ _ _ _ (beep).

2. Enter the number of rings _ _ then press * (beep).

3. Press 0# TOGETHER to end this programming step (beeeeeep).

1812-065-M-3-07 Page 27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 46 47

No comments

Controlled-products-systems-group 1812-087 User Manual Page 27