Controlled-products-systems-group 1812-087 User Manual download pdf (Page 31)

2.5 PROGRAMMING DIAL-OUT FUNCTIONS

2.5.1 Call Forward Programming

These steps program the call forwarding telephone number into the 1812 memory. Call forwarding

can only be used when the 1812 is programmed in phone mode (see 2.3.3).

1. Press * 1 0 and enter the four-digit MASTER CODE _ _ _ _ (beep).

2. If the forwarding number is long distance, press 1 then enter the area code _ _ _ and

then press * (beep). If the forwarding number is 10 digits, press # then enter the area

code _ _ _ and then press * (beep). If the forwarding number is local, press # # # #

then press * (beep).

3. Enter the seven-digit phone number _ _ _ _ _ _ _ then press * (beep).

4. Press 0# TOGETHER to end this programming step (beeeeeep).

2.5.2 Call Forward On / Off

These programming steps are used to turn call forwarding on or off.

1. Press * 1 4 and enter the four-digit MASTER CODE _ _ _ _ (beep).

2. Press 1 * (beep) to turn call forwarding ON, or press 0 * (beep) to turn call forwarding

OFF.

3. Press 0# TOGETHER to end this programming step.

2.5.3 Preprogrammed Phone Numbers

The 1812 system has the capability of calling out to three preprogrammed phone numbers from the

system keypad. These numbers are different than the call forwarding number that was programmed

in 2.5.1. When a visitor presses 01, 02, or 03 on the system keypad, the 1812 will call the

preprogrammed phone number programmed under the specific directory number. This feature cannot

be used if the 1812 is programmed in the intercom mode (2.3.3).

To program the number that will be called when 0 1 is pressed on the keypad:

1. Press * 2 1 (see note below) and enter the four-digit MASTER CODE _ _ _ _ (beep).

2. If the number to be called is long distance, press 1 then enter the area code _ _ _

and then press * (beep). If the forwarding number is 10 digits, press # then enter the

area code _ _ _ and then press * (beep). If the number to be called is local, press

# # # # then press * (beep).

3. Enter the seven-digit phone number _ _ _ _ _ _ _ then press * (beep).

4. Press 0# TOGETHER to end this programming step (beeeeeep).

STEP 1 NOTE:

Press * 2 2 to program the phone number called when 02 is pressed on the keypad.

Press * 2 3 to program the phone number called when 03 is pressed on the keypad.

1812-065-M-3-07 Page 31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 46 47

No comments

Controlled-products-systems-group 1812-087 User Manual Page 31