Controlled-products-systems-group 1812-087 User Manual download pdf (Page 37)

Resident Operating Instructions

The following operating instructions assume that the 1812 features are being turned on and off from

the resident’s touch tone telephone and that the system attention number is 7 (factory setting). If the

system attention number has been changed, use the new attention number in step 1. These steps

can also be performed at the system keypad by skipping step 1 (start with step 2) and by pressing 0 #

together in place of step 4.

4.5 Call Forwarding Enable / Disable

To use the call forward feature, be sure that a call forwarding number has been programmed into the

system memory (2.5.1). This operating step turns the call-forwarding feature on or off. If this feature is

turned on, all calls from the 1812 will be forwarded regardless of whether the call forwarding time

zone is turned on or off. If the call forwarding feature is to be time zoned, this step must be

programmed off.

1. Pick up your telephone and press * 7 (beep).

2. Press * 1 4 and enter the four-digit MASTER CODE _ _ _ _ (beep).

3. Press 1 * (beep) to turn call forwarding on, or press 0 * (beep) to turn call forwarding

off.

4. Hang up.

4.6 Call Forward Time Zone Enable / Disable

To use the call forwarding time zone feature, be sure that a call forwarding time zone has been

programmed into the system (2.4.5), that a call forwarding number is programmed (2.5.1), and that

the call forwarding is turned off (2.5.2). This will cause the 1812 to check the time zone before

forwarding any calls to the forwarding number.

1. Pick up your telephone and press * 7 (beep).

2. Press * 3 7 and enter the four-digit MASTER CODE _ _ _ _ (beep).

3. Press 1 * (beep) to turn call forward time zone on, or press 0 * (beep) to turn call

forward time zone off.

4. Hang up.

4.7 Do Not Disturb Enable / Disable

To use the Do Not Disturb feature, be sure that a do not disturb time zone has been programmed into

the system memory (2.4.2). When the do not disturb feature is turned on, the 1812 will not allow calls

from the unit to ring up to the house and will not allow calls to be forwarded regardless of whether the

call forwarding feature is turned on or off.

1. Pick up your telephone and press * 7 (beep).

2. Press * 3 4 and enter the four-digit MASTER CODE _ _ _ _ (beep).

3. Press 1 * (beep) to turn do not disturb on, or press 0 * (beep) to turn do not disturb

off.

4. Hang up.

1812-065-M-3-07 Page 37

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 46 47

No comments

Controlled-products-systems-group 1812-087 User Manual Page 37